Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

10.06.2025 00:58

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

a photo is worth a thousand words.

At least they know the answer if they wanted it.

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

What are mean nicknames to call my sister? She is always so mean to me.

eight

First Sentence:

This is 'the assistant's answer'

We've finally slowed the surge in overdose deaths. The Trump admin may undo all of it - Salon.com

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

What is lightning?

In schematic diagrams this is the symbol for a fuse:

Do older women know what they want?

He then describes Rainy Season and Lightning.

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

How do you confront your own family for not inviting you or leaving you out of things?

This one hit behind the barn.

but I think this circuit , shows a few more pieces.

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

Bethenny Frankel Reveals Her Teenage Daughter Bryn's Reaction to Her SI Swimsuit Look - People.com

But it can get overloaded, and no longer works.

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

nine

How could NASA possibly land on the moon when it's impossible to reach the moon through the Earth's dome? Why are they making up such an obvious lie?

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

The bolt then partially travels down the line to your home.

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

How can you maintain self-control?

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

2024–10–14 [Omar Gharbi Omar Gharbi ]

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

What’s a historical event you wish more people talked about?

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

so, what happens?

Now when you have a certain ac resistance, then a current flows in a loop.

Here Is the Real Size of a Meatball Made From the Entire Human Race (Spoiler: It’s Smaller Than You Think) - The Daily Galaxy

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

The other is “what does a “fuse” do?”

Apple’s 2024 M4 MacBook Pro with a 1TB SSD has never been this cheap - The Verge

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

This is the picture of an electronic coil of wire wound around a core of magnetic material.

2024–10–16 [ OO OLAOYE OYEBODE ]

Europe stock markets fall after Trump doubles steel tariffs - CNBC

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

It also is a device that limits the change in current flow.

[old diagram got deleted by accident]

One

This is where the MOV conducts again, and dissipated the energy.

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

The third is lightning and “how it gets conducted into a home.”

He then asserts :

what exactly is a ‘surge’ protector?

For this case there are devices called Metal oxide varistors (MOV).

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

These devices are installed between the “hot” and “neutral” and protective ground.

At one ohm, the resistor has a maximum of 1 watt power.

Because the load is inductive, the current lags the voltage.(by a bit).

Edit 2024–10.

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

He then describes the function of a fuse.

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

(Dc diagram shown, AC is similar).

There are three different concepts here that are getting confused.

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

Can the fuse protect the electronic devices from lightning instead of a surge protector.

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

But… the neutral is now “floating” because of the 1 ohm resistance.

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

The MOV will conduct when the voltage exceeds 50% of line voltage.

A circuit breaker is similar, but is resettable.

Barnstars:

the problem then depends on "how fast does the fuse operate?".

I post the exact comment here.

A fuse is a non-resetable over current circuit protector.

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

These are simplified answers to the original question, and does not change anything I wrote above.

So, the voltage could go up to 500 volts, and the fuse will not open up.

2024–10–10[John johnson John Johnson ]

This device then solves the entire problem.

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

[image of Common-mode choke]

One is “what exactly is in a ‘surge protector’ ? ”

Upvotes:

An AC voltage/ current source, and an ac inductive load.

There are two important concepts here.

It seems Mohan does not understand the difference between a comment and an Answer.

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

Here is a simplified AC power diagram.

This is where this question deviates from being a 'generic' question, and becomes more specific.

but this device (an Inductor) … impedes the rapid changes in the current.

What does a fuse do?